WIRE 2024
2024/4/14 Sacma Group will
be attending WIRE 2024 from 15 to 19 April 2024 in Düsseldorf, booth Hall 16 /
D44. The leitmotiv of Sacma Group is
to innovate steadily and provide the most reliable range of machines making our customers more competitive in a continuously evolving market.
As usual Sacma
Group will welcome all the actors of the forming world in its always appreciated
booth for an exceptional exhibition dedicated to its four brands Sacma, Ingramatic,
HS Aspe and Tecno Lift. The stand will display the most important
innovations launched by the R&D’s, immediately ready for the market.
Sacma will present the series
of the combined machine model SP18. Sacma has updated its well known SP18
with the new soundproof enclosure, the new wire feeder with direct drive motor,
the new HMI software and new transfer unit. This combined header can produce
fasteners and screws for the automotive, construction, electric/ electronic,
white industry, starting from wire. That’s the best solution for high
productivity requirements, consolidation of production methods, floor space
utilization and work flow in the fasteners manufacturing process by having the
forming, chamfering and thread rolling all in one machine. The machine is
equipped with latest technologies available on the market like direct drive
motors and ultimate software to facilitate the operators to make quick
changeover easily and safely.
Ingramatic fast and strong
in innovation. The Ingramatic division is today the
worldwide leading company for designing and manufacturing cold and warm thread
rolling machines. The well-known modular “I-Thread” machine line provides many innovative features like the
starter units driven by torque motor motion which will be displayed with the 2024
RP120 (TR1/W1015).
That machine is
the best compromise between rigidity and high tech features making the most
competitive thread rolling machines for building, construction, electronic,
furniture, appliance and Automotive fasteners running up to 600ppm.
The control of
the introduction system is obtained by a torque motor. The introducer stroke
can be adjusted by the operator panel or by means of the electronic handwheel
without any manual adjustment, ensuring speed
and accuracy of production changeover. The blanks are separated at the feed
point by a innovative stop system that positions the workpiece on three points
before it is placed between the dies.
Ingramatic
supplies a monobloc soundproof enclosure. The built-in safety enclosure
guarantees operator’s safety and noise reduction. The enclosure rest directly
on the base to ensure that all the liquids circulating in the machine are
contained and collected making the RP120 ecofriendly. A special design has been made for RP120 in
order to make the machine very compact and to reduce the space requirements and
to permit a shorter commissioning time.
That new thread
rolling machine has all features to insure the quick change over, saving space,
precision, ergonomic and low production cost by its construction design..
The brand HS
ASPE is the division of the group providing secondary operation machines
to run pre-formed parts with a range of technologies which is consisting of
tapping machines, combined machines, transfer machines and multi spindle
turning machines. HS ASPE will show the new generation of combined machine
model DT12 running parts up to M12. Drilling and Tapping Combined
Machines are used to execute complementary operations in addition to the
tapping. Operations like drilling, boring, facing, chamfering are so performed,
sequentially or in overlapping, exploiting the single positioning/clamping of
the part under process. That way the output rate is strongly increased. A top
performer machine can be gifted with 2-3-4 working units.
Tecno Lift is the company of the group in charge of the design and the
manufacturing of all ancillaries for the Sacma Group machines to load, feed and
convey parts. All the machines shown on the booth will be equipped with Tecno
Lift solutions which are available for other application or existing machines
already installed to the customers.
Sacma Group staff
will be pleased to welcome visitors at Wire Dusseldorf 2024, booth Hall 16 /
D44, to show and explain better all the new technologies and the capacity to
support all the customers around the world.
回到列表