Guide To The System

Since 1939 we began and still continue to operate according to this corporate philosophy. With constant determination, enthusiasm and earnest dedication we have been committed ever since, to privilege and unconditionally guarantee the absolute satisfaction of our customers.
As witness of our continued success in the field of cold forming, bolt making and warm forming equipment, always striving to reach ultimate perfection and full commitment to constant evolution, we build machines in, what today the industry considers, the most modern and best equipped manufacturing facility in the world.

Project, design and manufacturing technologies, that constantly foresee the future, in terms of innovation and absolute reliability, are integrated in perfect harmony with people, motivated by the certainty of cooperating in a decisive manner, for the creation of a product, which is beyond the edge of excellence.
At a time when many of our competitors are relocating their production to low-cost countries, we, in order to guarantee our undisputed quality, are expanding our manufacturing facilities in the “Italian Fastener Valley”. For all the above we wish to assert once again our commitment to advise and assist you by manufacturing and supplying machines that will noticeably contribute in shaping, for you, an always better future, together.

sacma, guide to the system Sacma, guide to the system, headers, progressive, characteristics, long stroke, quick tool change, CR, Heading, dies, cut, knock-out, punch, Speed, motor, tool pocket sizes, knife, quill, pesi, weights, SP150, SP160, SP250, SP260, SP270, SP350, SP360, SP370, SP460, SP470, SP560, SP570, SP570-C, SP660-A, SP670-AS, SP250-EL, SP260-EL, SP270-EL, SP350-EL, SP360-EL, SP360-sl-SM, SP460-L, SP441-EL, SP660-AL, SP670-AL
5 6 P R O G R E S S I V E
  PROGRESSIVE HEADERS
CHARACTERISTICS SP160 SP260 SP270 SP360 SP370 SP460 SP470 SP560 SP570 SP570-C SP670-AS
QUICK TOOL CHANGE CR*       * * * * * * * *
Heading load KN 500 700 800 1.400 1.400 2.200 2.200 3.200 3.200 3.600 6.500
Number of dies No. 5 5 6 5 6 5 6 5 6 6 6
Cut-off diameter (600 N/mm²) mm 8 10,5 11,5 15 15 20 20 24 24 24 33
Cut-off length (max) mm 65 85 85 127 127 165 165 230 230 160 220
Die kick-out (max)(max) mm 45 65 65 90 90 120 120 180 180 110 160
Punch knock-out (max) mm 14 20 20 29,3 29,3 43,5 43,5 46,5 46,5 46,5 64
Speed Range up to (rpm)° No. 350 275 275 200 200 160 160 120 120 130 100
Main motor KW 30 30 30 45 45 75 75 100 100 100 150
TOOL POCKET SIZES
Die - ØxL mm 45x
70
54x
90
54x
110
75x
125
75x
125
100x
195
100x
195
110x
225
110x
225
110x225 150x295
Punch (fixed) - ØxL mm 38x
85
45x
100
45x
100
60x
125
60x
125
75x
170
75x
170
85x
170
85x
170
85x170 120x260
Knife - Ø mm 20 29 32 38 38 55 55 60 60 60 80
Quill - Ø mm 21 30 31 39 39 68 68 78 78 78 112
WEIGHTS
Net mass Kg 9.500 15.000 18.000 24.000 26.000 44.000 45.000 48.000 50.000 50.000 130.000
  LONG STROKE
CHARACTERISTICS SP260-EL SP270-EL SP360-EL SP360-SL SP460-L SP451-EL SP670-AL
QUICK TOOL CHANGE CR*     * * *   *
Heading load KN 700 800 1.400 1.250 2.200 2.500 5.500
Number of dies No. 5 6 5 5 5 5 6
Cut-off diameter (600 N/mm²) mm 10,5 11,5 15 12,5 20 22 31
Cut-off length (max) mm 115 115 165 190 200 350 300
Die kick-out (max) mm 25-90 25-90 20-135 50-160 50-160 60-300 40-240
Punch knock-out (max) mm 20 20 29,3 29,3 43,5 43,5 64
Speed Range up to (rpm)° No. 220 220 150 140 130 70 80
Main motor KW 30 30 45 45 75 75 150
TOOL POCKET SIZES
Die - ØxL mm 54x110 54x110 75x160 75x180 100x195 100x345 150x295
Punch (fixed) - ØxL mm 45x100 45x100 60x125 60x125 75x170 75x170 120x235
Knife - Ø mm 29 32 38 38 55 55 80
Quill - Ø mm 30 31 39 39 68 68 112
WEIGHTS
Net mass Kg 15.000 18.000 24.500 27.000 44.000 50.000 125.000
sacma, guide to the system Sacma, guide to the system, presses, combined, characteristics, long stroke, quick tool change, CR, Heading load, Thread diameter, dies, cut,  knock-out , punch, speed, motor, tool pocket sizes, knife, Quill, Thread roll die, weights, mass, SP17, SP18, SP27, SP28, SP37, SP38, SP48, SP58, SP27-EL, SP28-EL, SP37-EL, SP38-EL
5 6 C O M B I N E D
  COMBINATE
CHARACTERISTICS SP18 SP28 SP38 SP48 SP58 SP59-C SP59
QUICK TOOL CHANGE CR*     * * * * *
Heading load KN 500 700 1.400 2.200 3.200 3.600 3.200
Number of dies No. 5 5 5 5 5 6 6
Cut-off diameter (600 N/mm²) mm 8 10,5 15 20 24 24 24
Cut-off length (max) mm 65 85 127 165 230 160 230
Die kick-out (max) mm 45 65 90 120 180 110 180
Punch knock-out (max) mm 14 20 29,3 43,5 46,5 46,5 46,5
Thread diameter (max 8.8/12.9) mm M6 M10/M8 M14/M12 M20/M18 M24/M22 M24/M22 M24/M22
Thread length (max) mm 38 65 90 100 100 100 100
Shank length (min÷max) mm 10÷45 14÷65 20÷90 25÷120 35÷180 35÷110 35÷180
Speed Range up to (rpm)° No. 350 275 200 160 120 120 120
Main motor KW 30 30 45 75 100 100 100
TOOL POCKET SIZES
Die - ØxL mm 45x70 54x90 75x125 100x165 110x225 110x225 110x225
Punch (fixed) - ØxL mm 38x85 45x100 60x125 75x170 85x170 85x170 85x170
Knife - Ø mm 20 29 38 55 60 60 60
Quill - Ø mm 21 30 39 68 78 78 78
Thread roll die moving X Y Z mm 106
41
13
146
68
16
216
92
21
254
105
22
305
105
25
305
105
25
305
105
25
Thread roll die stationary X Y Z mm 89
41
13
127
68
16
191
92
21
229
105
22
280
105
25
280
105
25
280
105
25
WEIGHTS
Net mass Kg 11.500 16.500 26.500 47.000 58.500 60.500 60.500
  LONG STROKE
CHARACTERISTICS SP28-EL SP38-EL SP38-SL SP48-L
QUICK TOOL CHANGE CR*   * * *
Heading load KN 700 1.400 1.250 2.200
Number of dies No. 5 5 5 5
Cut-off diameter (600 N/mm²) mm 10,5 15 12,5 20
Cut-off length (max) mm 115 165 190 200
Die kick-out (max) mm 25-90 20-135 50-160 50-160
Punch knock-out (max) mm 20 29,3 29,3 43,5
Thread diameter (max 8.8/12.9) mm M10/M8 M14/M12 M12/M10 M20/M18
Thread length (max) mm 65 90 100 100
Shank length (min÷max) mm 25-90 20-135 50-160 50-160
Speed Range up to (rpm)° No. 220 150 140 130
Main motor KW 30 45 45 75
TOOL POCKET SIZES
Die - ØxL mm 54x110 75x160 75x180 100x195
Punch (fixed) - ØxL mm 45x100 60x125 60x125 75x170
Knife - Ø mm 29 38 38 55
Quill - Ø mm 30 39 39 68
Thread roll die moving X Y Z mm 146
68
16
216
92
21
216
103
21
254
105
22
Thread roll die stationary X Y Z mm 127
68
16
191
92
21
191
103
21
229
105
22
WEIGHTS
Net mass Kg 16.500 27.000 27.000 47.000
sacma, guide to the system Sacma, guide to the system, presses, warmforming, warm, S-Feed, Servomotor wire feed, characteristics, long stroke, quick tool change, CR, Heading load, Thread diameter, dies, cut,  knock-out , punch, speed, motor, tool pocket sizes, knife, Quill, Thread roll die, weights, mass, SP250-WF, SP260-WF, SP270-WF, SP350-WF, SP360-WF, SP370-WF, SP460-WF, SP470-WF, SP560-WF, SP570-WF, SP570C-WF, SP250-EL-WF, SP260-EL-WF, SP270-EL-WF, SP350-EL-WF, SP360-EL-WF
5 6 W A R M F O R M I N G
  WARM FORMING
CHARACTERISTICS SP260-WF SP270-WF SP360-WF SP370-WF SP460-WF SP470-WF SP560-WF SP570-WF SP570C-WF
S-Feed - Servomotor wire feed * * * * * * * * *
Heading load KN 700 800 1.400 1.400 2.200 2.200 3.200 3.200 3.200/3.600
Number of dies No. 5 6 5 6 5 6 5 6 6
Cut-off diameter
(600 N/mm²)
mm 10,5 11,5 15 15 20 20 24 24 25
Cut-off length (max) mm 85 85 127 127 165 165 230 230 160
Die kick-out (max) mm 65 65 90 90 120 120 180 180 110
Punch knock-out (max) mm 20 20 29,3 29,3 43,5 43,5 46,5 46,5 46,5
Speed Range up to (rpm)° No. 275 275 200 200 160 160 120 120 130
Main motor KW 30 30 45 45 75 75 100 100 100
TOOL POCKET SIZES
Die - ØxL mm 54x90 54x110 75x125 75x125 100x165 100x165 110x225 110x225 110x225
Punch - ØxL mm 45x100 45x100 60x125 60x125 75x170 75x170 85x170 85x170 85x170
Knife - Ø mm 29 32 38 38 55 55 60 60 60
Quill - Ø mm 30 31 39 39 68 68 78 78 78
Single Induction coils KW 30 30 50 50 150 150 150 150 150
Double Induction coils KW 30+30 30+30 50+30 50+30 - - - - -
WEIGHTS
Net mass Kg 15.000 18.000 24.000 26.000 41.000 48.000 48.000 50.000 50.000
  LONG STROKE
CHARACTERISTICS SP260-EL-WF SP270-EL-WF SP360-EL-WF
S-Feed - Servomotor wire feed
Heading load KN 700 800 1.400
Number of dies No. 5 6 5
Cut-off diameter
(600 N/mm²)
mm 10,5 11,5 15
Cut-off length (max) mm 115 115 165
Die kick-out (max) mm 90 90 135
Punch knock-out (max) mm 20 20 29,3
Speed Range up to (rpm)° No. 220 220 150
Main motor KW 30 30 45
TOOL POCKET SIZES
Die - ØxL mm 54x110 54x110 75x160
Punch - ØxL mm 45x100 45x100 60x125
Knife - Ø mm 29 32 38
Quill - Ø mm 30 31 39
Single Induction coils KW 30 30 50
Double Induction coils KW 30+30 30+30 50+30
WEIGHTS
Net mass Kg 15.000 18.000 24.500