New series of 6 dies progressive header SP470-CRM

22/11/2015

For the production of Net Shape special parts, Sacma introduces the new release of its 6 dies progressive headers inspired by the S-Forging concept. The new touch screen panel SC-Matic is facilitating the tool set up, taking under control the process through the machine supervision and management. Sacma can guarantee the quality of the produced parts using the new LoadMatic, by monitoring the loads and driving the discharging device for the n.c. parts with the transfer fingers or a gate before the finished parts conveyor.

The Sacma Transfer System with its 7 strategies of transferring, consolidates its position of excellence, for its capacity to handle the wider range of parts, starting from shortest to the extra-long ones, at maximum production speed. The introduction of the patented Transfer Support Assist Package extends the transferring performance to more difficult tapered and stepped parts. The Timed Desmodrive cams allows the transfer of the most difficult parts adjusting the timing of departure of the transfer rack after each forging operation.

Sacma introduces the new series of 6 dies progressive header SP470-CRM, 20mm cut off and 220ton power load, for the production of net shape special parts. The new machine features are the quick hydraulic fixing system of the transfer rack, the hydraulic unclamping of transfer cams for quick timing adjustment, the safety screen to protect the operator during the operations in jog mode and the new transfer driving system by means of slide with automatic engagement.  A new design of the soundproof cabin allows to reduce the noise generated during the production.

The machine is also equipped with the following characteristics making the Sacma header the most reliable header :
•    Solid Iron one piece cast frame
•    Patented wire feeder “S-Feed”, wire and bar feeding, alternate blow
•    Desmodrive transfer, new driving system and hydraulic camshaft, transfer Assistance Package
•    Heading slide made of NiCrMo alloy steel casting heat treated with an exclusive taper slide
•    New Quick changeover with hydraulic clamping
•    Fully motorized adjustments, touch screen command panel and clamping
•    SC-Loadmatic for part quality management
•    Electronic handwheel for slow motion jog control
•    Warm Forming SP470 available

Go Back to the list